What do shock risers do

The area of your deck on which your trucks are mounted is considered the most fragile area of the deck. When landing tricks, the entire impact energy is transferred from the trucks to the deck, making it weaker and causing it to break over time. In doing so, shock pads reduce the forces that are transmitted from the trucks to the deck and thus inhibit fractures or splintering so-called pressure cracks. A wheel bite is the result of your deck coming into contact with your wheels.

If you skate with large wheels or low trucks, the distance between the wheels and the deck is smaller. Landing tricks and hard turns can create this unpleasant meeting of deck and wheel, leading to a very abrupt and likely painful stop.

Through the use of pads you increase the distance between your deck and wheels, impeding annoying wheel bites. Should you however use larger wheels or prefer very soft steering, shock pads can be a huge help.

These are what we call Angled Riser Pads. However, this type of riser pad is generally used for longboards and cruisers. For example, if you face both angled risers so the thick part faces the center, you can increase front turn capabilities while decreasing rear turn capabilities.

Both angled and rectangular risers are available in drop-thru style. Many manufacturers have also put a creative spin on riser pads in the last few years by adding interesting design cutouts on their riser pads.

Not only does it look cool, but it also decreases the total weight of your skateboard. Additionally, some skateboarders like to mix and match rectangular and angled riser pads. For instance, an angled riser with thick part facing the center and a flat riser on the back can increase your front turn steering capabilities while stabilizing the back, and vice-versa.

Be aware that no matter what riser pad shape you choose, you will need to buy longer hardware to accommodate the extra height! Consult our helpful hardware size calculator above. When you install riser pads, you of course want to install four screws, one on each corner. However, you might notice that there are a total of six holes in skateboard riser pads.

Why is this? Manufacturers conveniently put an extra set of holes in most riser pads to accommodate both new school and old school skateboards. As we mentioned in our trucks section, the mounting holes in old school boards are slightly further apart because old school trucks pres were larger. So to avoid having to sell "old school riser pads" and "new school riser pads" as separate products, manufacturers simply drilled an extra set of holes to give skateboarders the option of which type of trucks they want to use.

It dampens a great amount of vibration and also serves as a great shock absorber. Size specification is also ideal for just a little boost. It can be a little confusing but it did not cause much harm. It was easily resolved with their responsive customer support, but I hope they would fix it because it is not cool when the product described is not shown to be true when the actual product is received.

Good thing is that their customer support is easy to talk to, so just be aware of details as such when you shop. For a time, I started to get really bothered by the terror of experiencing wheel bites.

It was a pain in the neck and it has already caused me numerous incidents in riding my skateboard. Installing these Independent Trucks made all the difference. It is easy to install their skateboard risers between my trucks and deck. I found it to be just the right lift between my wheels and deck and I have entirely waved goodbye to wheel bites! This could easily be the best skateboard hardware for me. So, if you are doubting to get these risers like I did because of the size, I can guarantee you through my own experience that it makes for an excellent drop through the riser.

Apparently, a little boost goes a long way. Needless to say, the bigger the riser is, the larger the distance between the wheel and the deck is.

Thus, it is important to choose the most suitable size for your board. Some risers have slots so that it can move back and forth under the truck base plate when installing. The purpose of this is to allow buffers in hole positions between different brands of trucks. Some risers have fixed four or six hold patterns, which are generally suitable for most popular brands. In general, when choosing the right skateboard riser for your board, you should consider how you set it up and how you ride.

We also have a list of the skateboard stickers for your reference. Furthermore, take a look at our top rated skateboard ramps if you like. As with anything, it is smart to consider the material used as well. Some riser pads are made of hard plastic, which some say become quite brittle over time; while others are made of rubber, which seem to be more durable. Most come in black, which is a universal color but some brands offer a variety of colors and designs.

Whether you are a newbie or a pro at skateboarding, skateboard riser pads can help improve your ride as they help avoid wheel bites, which happen when the wheel rubs the deck during a sharp maneuver and when doing exhibitions. Wheel bite causes sudden stops to the wheel. This abrupt stop can cause an awful fall for you and unwanted damage to your skateboard. The good thing is, the dreaded wheel bites can be avoided with the use of skateboard risers.

Skateboard risers provide an additional height when mounted between the skateboard trucks and skateboard deck. They essentially offer taller trucks. They can also provide cushioning and absorb shock, which leads to smoother rides. They can even lengthen the life of your well-loved skateboard by lowering the risk for stress cracks where the deck and the trucks connect. A riser is flat and is commonly made of hard plastic or rubber that is installed between the skateboard truck and the skateboard deck.

It comes in a variety of colors black being the most common , designs, and thickness levels. Why do you need skateboard riser pads? How do you know if you absolutely need a riser pad? Rectangular riser pads are the most basic and common shape for skateboard riser pads. This particular shape increases the level of the deck and decreases the shock.

You must note though that the additional height could also limit your maneuvers. This shape is suitable for both skateboarders and longboarders but if you have larger longboard wheels, a thicker riser pad is more appropriate. This type does not only raise your trucks but also mounts them at an angle from your deck. You can fix them in such a way that they are angled away from or towards the center. They change the turning characteristics of a truck, based on which direction they are installed.

Both shapes are available in drop-thru style. As many skateboarders like to add a pop of style to their boards, manufacturers have become more creative over the years by also offering interesting design cutouts on their riser pads, which also decreases the overall weight of the skateboard.

Talk about functionality and style! Most skateboard riser pads come in sets of two, and some are already bundled with appropriate hardware. Yes, but you will need longer bolts if you want to stack up risers for extra big diameter wheels. Skateboard riser pads are highly recommended in preventing wheel bites. They are more intended for larger wheels 55mm up as these are more prone to wheel bites.

Risers give extra clearance between the skateboard trucks and skateboard deck. They can also provide cushioning and absorb shock for smoother rides.

They can even prolong the life of your precious skateboard by reducing stress cracks. Both newbies and pro skateboarders benefit from using riser pads, especially if wheel bite is a particular concern. The main consideration of whether or not to use riser pads is actually the size of the wheels. As a basic rule, risers are necessary for larger wheels 55mm up as these are more prone to wheel bites. Not really. Risers are specifically intended to help prevent wheel bites and absorb the impact of landing tricks.

They do not provide significant help in making your ollies higher. Installing best skateboard risers can make a huge difference in skateboarding by significantly reducing, if not eliminating, wheel bites. They give a perfect offset between the deck and the ground as the truck is raised higher off the deck.

Tricks can become more doable as the wheels do not hit the board with sharp turns and maneuvers. They also provide good shock absorption especially in landing tricks and bumpy roads. There is simply a lack of the annoying and uncomfortable shocks from the wheels hitting things. Prevent stress cracks. Those cracks result from the aging wood in the deck shrinking while under stress from skating and from the tightness of the truck bolts.

Stress cracks are one reason why old decks can feel spongy, but they can also ruin even relatively new boards. One way to prevent them is by using shock pads, because they absorb the energy from the common stresses in skating. The equipment you use should add to your experience and should enable you to do what you want when you skate. If riser pads or shock pads accomplish that for you, then by all means use them.

However, make sure you understand the differences between the two, so that you can get the most out of your setup. If you only want a slight rise, then you can choose the type that suits you best.

Risers are an inexpensive way to play around with your equipment and find out what works best for your unique style of skating. Yocaher Admin. Recent Posts See All. Post not marked as liked 1. Post not marked as liked 3.